Timber Products

Sawn &
Dried
Lumber

Precision-Cut Boards, Planks & Beams

Kiln-dried and air-dried timber cut to exact dimensions — supplying builders, furniture makers, and contractors with structural-grade and finish-grade lumber since 1998.

Request a Quote Browse Products

20+

Lumber Species

Standard Grades

48hr

Quote Turnaround

Precision Lumber

Kiln
Dried

Scroll

SAWN BOARDS ✦ STRUCTURAL BEAMS ✦ TONGUE & GROOVE ✦ KILN DRIED ✦ AIR DRIED ✦ HARDWOOD PLANKS ✦ SOFTWOOD BOARDS ✦ CUSTOM CUT ✦ GRADED TIMBER ✦ SAWN BOARDS ✦ STRUCTURAL BEAMS ✦ TONGUE & GROOVE ✦ KILN DRIED ✦ AIR DRIED ✦ HARDWOOD PLANKS ✦ SOFTWOOD BOARDS ✦ CUSTOM CUT ✦ GRADED TIMBER ✦

99%

Defect-Free
Grade A Stock

What We Supply

From the Saw Blade
to Your Site

Our sawn lumber range covers everything from rough-sawn structural boards to planed, finished planks ready for joinery and furniture. Every piece is dimensionally accurate, moisture-tested, and graded before dispatch.

We cut to order across hardwood and softwood species — meaning you get the exact section, length, and grade your project demands, every time.

Kiln-dried to <15% MC or air-dried to <20% MC
Rough-sawn and planed-all-round (PAR) options
Custom lengths and cross-sections on request
Bundled, strapped, and labelled per order
Nationwide delivery — site, warehouse, or mill

Browse Lumber Types →

Product Range

Our Lumber Categories

Get a Quote

Lumber Specifications

Standard stock ranges and custom-cut options are detailed below. All dimensions are nominal unless specified as finished (PAR).

Species	Oak, Teak, Mahogany, Ash, Walnut
Thickness Range	12mm – 100mm (rough or PAR)
Width Range	50mm – 350mm
Standard Lengths	1.8m, 2.4m, 3.0m, 3.6m, 4.2m, custom
Moisture Content	<10% (KD) \| 12–18% (AD)
Surface Options	Rough Sawn, S1S, S2S, S4S (PAR)
Grades Available	FASSelectNo.1 Common
Min. Order	1 m³ \| larger orders: volume pricing

Species	Scots Pine, Spruce, Fir, Larch, Cedar
Thickness Range	19mm – 75mm
Width Range	38mm – 300mm
Standard Lengths	2.4m, 3.0m, 3.6m, 4.8m, 6.0m
Moisture Content	<18% (KD) \| 20–25% (green)
Surface Options	Rough Sawn, Regularised (CLS), PAR
Grades Available	C24C16General Purpose
Min. Order	0.5 m³

Types	Solid Beams, Glulam, LVL, I-Joist
Section Sizes	75×150 – 300×600mm (custom available)
Span Lengths	Up to 12m (glulam to 20m)
Strength Class	C24 minimum \| D50 for hardwood beams
Moisture Content	<15% (service class 1 & 2)
Certification	CE Marked \| EN 14080 (glulam)
Grades Available	StructuralVisual
Lead Time	Stock: 5–7 days \| Custom: 10–21 days

Profile Types	T&G, Shiplap, V-Joint, Rebated, Ogee
Thickness (finished)	12mm – 45mm
Width (finished)	75mm – 175mm (face width)
Standard Lengths	1.8m – 5.4m in 0.3m increments
Moisture Content	<14% for internal \| <18% for external
Surface Finish	Unfinished, Primed, Pre-oiled
Species	Pine, Spruce, Oak, Larch, Accoya
Min. Order	25 linear metres per profile

Size Guide

Standard Dimensions We Stock

📏

Boards

Flat Boards

Thickness12 – 50mm

Width75 – 300mm

Length1.8 – 4.8m

SurfaceRough / PAR

Ideal for flooring, wall panelling, shelving, and general joinery applications.

🔲

Planks

Thick Planks

Thickness50 – 100mm

Width100 – 350mm

Length2.4 – 6.0m

SurfaceRough / S2S

Used for heavy-duty shelving, workbenches, stair treads, and furniture blanks.

🏗️

Structural

Beams & Posts

Section75×150 – 300×300

Lengthup to 12m

GradeC16 / C24 / D50

Tolerance±1mm finished

Engineered for load-bearing structures — rafters, ridge beams, columns, and floor joists.

Drying Process

Kiln-Dried vs Air-Dried
— Which Do You Need?

Recommended

Kiln Dried (KD)

Timber dried in a controlled heated chamber to precisely reduce moisture content. Results in stable, consistent lumber with minimal shrinkage or warping after installation — ideal for interior joinery and precision work.

Moisture< 10–15%

Turnaround3–7 days

Best ForInterior, Joinery

StabilityExcellent

Traditional

Air Dried (AD)

Timber stacked in covered outdoor yards and allowed to dry naturally over an extended period. A more gradual process that preserves natural character — valued by craftsmen for furniture and decorative woodwork.

Moisture12–20%

Turnaround3–24 months

Best ForFurniture, Craft

CharacterExcellent

Quality Standards

Lumber Grading Guide

Grade	Classification	Appearance	Typical Use	Knots / Defects
FAS	Firsts and Seconds	Premium — clear face, minimal character marks	Fine furniture, cabinetry, decorative joinery	None – very few
Select	Select Grade	Near-clear — very minor marks allowed	Interior furniture, fitted kitchens, shelving	Tiny, tight only
No.1 Common	First Common	Good — small knots, limited variation	Flooring, panelling, secondary furniture parts	Small tight knots
No.2 Common	Second Common	Character grade — visible knots & grain variation	Rustic furniture, cladding, boxes, pallets	Sound knots allowed
C24	Structural – High	Functional — appearance secondary to strength	Joists, rafters, studwork, structural frames	Knots up to 50mm
C16	Structural – Standard	Utility — strength class for general structure	Non-critical framing, general construction	Larger knots OK

Applications

Where Our Lumber Goes

🏗️

Structural Construction

Beams, joists, rafters, and studwork for residential and commercial building frames — strength-graded and certified.

🪟

Interior Joinery

Door frames, window surrounds, skirting, and architrave — smooth-planed hardwood and softwood in clear grades.

🪑

Furniture & Cabinetry

FAS and Select grade planks prized by furniture makers for consistent grain, clean surfaces, and dimensional accuracy.

Our Process

From Log to
Delivered Board

01

Log Selection & Sourcing

We start with certified, graded logs — selecting species and diameter to match your specified board output.
02

Precision Sawing

Band saws and circular saws cut to your exact dimensions — flat-sawn, quarter-sawn, or rift-sawn as required.
03

Drying & Conditioning

Boards are kiln-dried or air-dried to specification — moisture-tested and certified before grading begins.
04

Grading & Quality Inspection

Every board is visually and mechanically graded. Defects, warp, and moisture are documented per bundle.
05

Bundled & Dispatched

Strapped, labelled with species, grade, and moisture data, then loaded and delivered to your site or yard.